Monitoring

In terms of performance data, the A44H and the A7V are very close to each other. However, the A44H offers a very interesting housing variant: with its horizontal driver arrangement and a width of exactly 19 inches, the A44H can be placed perfectly on a studio rack as well as above or below a monitor or screen. This design is also ideal for use as a centre speaker in a 5.1, 7.1 or 3D monitor configuration. Two 4-inch long-throw woofers and an X-ART tweeter enable a wide frequency range. The DSP functions offer individual sound customisation options.

The T5V is an extremely budget-friendly 2-way nearfield monitor and has been optimised for use in smaller control rooms.The T5V has a 5" woofer that enables bass extension down to 45 Hz. The new U-ART offers a pristine and extended high frequency response of up to 25 kHz and represents a groundbreaking solution for high-resolution recordings and mixes on a tight budget. The U-ART tweeter features a precision waveguide with the same excellent dispersion characteristics as the High Frequency Propagation (HPS) waveguide used in the S-Series studio monitors. The very even reproduction of high frequencies by the waveguide ensures an incredibly wide sweet spot, which saves you from having to remain in a fixed position while working.A new cabinet with a small footprint, bevelled edges and a bass reflex port on the rear allows placement anywhere in the room, no matter how small. The T5V also features DSP-controlled crossovers and equalisers as well as analogue connection options (XLR/cinch). Powered by a 50 W Class-D amplifier for the woofer and a 20 W Class-D amplifier for the U-ART tweeter, the T5V achieves impressive peak levels of 106 dB SPL per pair. With its excellent acoustic properties, small dimensions and outstanding price/performance ratio, this studio monitor is very well suited for use in small control rooms for music production, video post-production and broadcasting.If you need even more bottom end: the T5V is compatible with the ADAM Sub7 and Sub8 subwoofers.

The D3V is a fully active desktop monitor system designed for composers, producers and music lovers who want to enjoy ADAM Audio's sound quality as comfortably as possible. Available in white or black, the active monitors feature the legendary gold-coloured ribbon tweeter and remain true to ADAM Audio's established German industrial design.Each pair of active speakers features 3.5-inch aluminium bass-midrange drivers and a ferrite magnet system powered by 80-watt amplifiers. The bass-midrange drivers are complemented by double-sided 3.5-inch passive radiators, giving the D3V an extended frequency response down to 45 Hz.With 25 years of experience in the design and manufacture of ribbon tweeters, ADAM Audio has designed the compact 1.5-inch D-ART (Desktop Accelerated Ribbon Tweeter). It enables the precise, unagitated high-frequency reproduction for which the manufacturer's established monitors are known.The D3V has a USB-C input. Accordingly, the monitor system behaves like a digital output device when connected to a computer and does not require an additional audio interface for playback. This plug-and-play functionality also extends to mobile devices, so that high-quality sound reproduction can be enjoyed without the data compression or conversion typically associated with such connections. The D3V also features balanced 6.35 mm TRS inputs for conventional analogue audio applications.The rear of the left speaker has a series of user-friendly switches to solve the typical acoustic problems associated with speaker placement. The front panel also features a headphone jack and a volume control that simultaneously controls audio input selection, muting and other functions.The D3V comes complete with detachable monitor stands, which are inclined at an angle of 15° in the direction of the user's ears. In addition, there is a standardised 3/8" thread on the bottom of both monitors for mounting on microphone stands.Fully active 3.5-inch aluminium bass-midrange driver with ferrite magnet systemOptimised via ADAM Audio's state-of-the-art Klippel measurement system, the extremely symmetrical voice coils and ferrite magnets help to minimise unwanted distortion and provide a linear drive to the bass-midrange drivers. Each one-piece concave cone is made of ribbed, thick aluminium with a long linear excursion that delivers uncoloured sound even at surprisingly high output levels.The D3V is a fully active design with four amplifier channels and DSP-controlled crossover. The bass-midrange drivers are powered by 80-watt amplifiers, with the link connection cable transmitting an amplified signal to the right speaker.D-ART tweeterA quarter of a century of research and development into ribbon tweeters has led to the development of ADAM Audio's powerful 1.5" Desktop Accelerated Ribbon Tweeter. Each diaphragm is hand-folded and bonded to 40W amplifiers that drive each unit. Like all other ADAM Audio tweeters, the D-ART features a fine-tuned crossover managed by a high-precision signal processor.Passive radiatorThe D3V utilises double-sided passive radiators in each speaker, a total of four per system. Each passive radiator consists of a stainless steel plate as the moving mass and a specially stabilised long excursion rubber surround as the suspension. Together they amplify the lowest frequencies of the loudspeaker through their interaction with the main bass-midrange drivers and thus contribute to an increase in the sound pressure level of the overall system.USB-C direct inputThe D3V is ADAM Audio's most convenient monitor system to date, as it features a plug-and-play USB-C input. The speakers behave like a digital output device when connected to a computer, mobile phone or tablet, eliminating the need for an additional audio interface. This direct digital connection enables high-quality audio playback without the data compression or additional conversion typically associated with desktop monitors.DSP room acousticsThere are three switches on the rear panel of the left speaker to counteract the typical acoustic problems resulting from speaker placement. "POSITION" refers to the fixed position of the speaker in the room. "DESK" refers to the size of the desk in front of the speaker, while "ROOM" refers to the degree of acoustic damping in the room in which the system is used.Balanced analogue inputsIn addition to the USB-C input, the D3V has analogue inputs for conventional audio applications. It enables balanced connections to audio interfaces as well as direct connections to a wide range of hardware, including synthesisers, drum machines, samplers and DJ mixing consoles. The USB-C connection or the balanced analogue inputs can be selected by pressing the volume control on the left speaker.Headphone output, monitor stand and mounting optionsFunctionality and convenience played a major role in the design of the D3V. The headphone output on the front automatically takes over audio playback when connected. Monitor stands angled at 15° are also included. In addition, there is a standardised 3/8" thread on the underside of both monitors for mounting on microphone stands.Injection moulded housingThe housing of the D3V is made of high-quality ABS injection-moulded polycarbonate with thick walls and ample bracing to prevent vibrations and unwanted resonances. The rounded shape reduces unwanted sound diffraction at high frequencies while honouring ADAM Audio's long-established industrial design.

The D3V is a fully active desktop monitor system designed for composers, producers and music lovers who want to enjoy ADAM Audio's sound quality as comfortably as possible. Available in white or black, the active monitors feature the legendary gold-coloured ribbon tweeter and remain true to ADAM Audio's established German industrial design.Each pair of active speakers features 3.5-inch aluminium bass-midrange drivers and a ferrite magnet system powered by 80-watt amplifiers. The bass-midrange drivers are complemented by double-sided 3.5-inch passive radiators, giving the D3V an extended frequency response down to 45 Hz.With 25 years of experience in the design and manufacture of ribbon tweeters, ADAM Audio has designed the compact 1.5-inch D-ART (Desktop Accelerated Ribbon Tweeter). It enables the precise, unagitated high-frequency reproduction for which the manufacturer's established monitors are known.The D3V has a USB-C input. Accordingly, the monitor system behaves like a digital output device when connected to a computer and does not require an additional audio interface for playback. This plug-and-play functionality also extends to mobile devices, so that high-quality sound reproduction can be enjoyed without the data compression or conversion typically associated with such connections. The D3V also features balanced 6.35 mm TRS inputs for conventional analogue audio applications.The rear of the left speaker has a series of user-friendly switches to solve the typical acoustic problems associated with speaker placement. The front panel also features a headphone jack and a volume control that simultaneously controls audio input selection, muting and other functions.The D3V comes complete with detachable monitor stands, which are inclined at an angle of 15° towards the user's ears. In addition, there is a standardised 3/8" thread on the underside of both monitors for mounting on microphone stands.Fully active 3.5-inch aluminium bass/midrange driver with ferrite magnet systemOptimised via ADAM Audio's state-of-the-art Klippel measurement system, the extremely symmetrical voice coils and ferrite magnets help to minimise unwanted distortion and provide a linear drive to the bass-midrange drivers. Each one-piece concave cone is made of ribbed, thick aluminium with a long linear excursion that delivers uncoloured sound even at surprisingly high output levels.The D3V is a fully active design with four amplifier channels and DSP-controlled crossover. The bass-midrange drivers are powered by 80-watt amplifiers, with the link connection cable transmitting an amplified signal to the right speaker.D-ART tweeterA quarter of a century of research and development into ribbon tweeters has led to the development of ADAM Audio's powerful 1.5" Desktop Accelerated Ribbon Tweeter. Each diaphragm is hand-folded and bonded to 40W amplifiers that drive each unit. Like all other ADAM Audio tweeters, the D-ART features a fine-tuned crossover managed by a high-precision signal processor.Passive radiatorThe D3V utilises double-sided passive radiators in each speaker, a total of four per system. Each passive radiator consists of a stainless steel plate as the moving mass and a specially stabilised long excursion rubber surround as the suspension. Together they amplify the lowest frequencies of the loudspeaker through their interaction with the main bass-midrange drivers and thus contribute to an increase in the sound pressure level of the overall system.USB-C direct inputThe D3V is ADAM Audio's most convenient monitor system to date, as it features a plug-and-play USB-C input. The speakers behave like a digital output device when connected to a computer, mobile phone or tablet, eliminating the need for an additional audio interface. This direct digital connection enables high-quality audio playback without the data compression or additional conversion typically associated with desktop monitors.DSP room acousticsThere are three switches on the rear panel of the left speaker to counteract the typical acoustic problems resulting from speaker placement. "POSITION" refers to the fixed position of the speaker in the room. "DESK" refers to the size of the desk in front of the speaker, while "ROOM" refers to the degree of acoustic damping in the room in which the system is used.Balanced analogue inputsIn addition to the USB-C input, the D3V has analogue inputs for conventional audio applications. It enables balanced connections to audio interfaces as well as direct connections to a wide range of hardware, including synthesisers, drum machines, samplers and DJ mixing consoles. The USB-C connection or the balanced analogue inputs can be selected by pressing the volume control on the left speaker.Headphone output, monitor stand and mounting optionsFunctionality and convenience played a major role in the design of the D3V. The headphone output on the front automatically takes over audio playback when connected. Monitor stands angled at 15° are also included. In addition, there is a standardised 3/8" thread on the underside of both monitors for mounting on microphone stands.Injection moulded housingThe housing of the D3V is made of high-quality ABS injection-moulded polycarbonate with thick walls and ample bracing to prevent vibrations and unwanted resonances. The rounded shape reduces unwanted sound diffraction at high frequencies while honouring ADAM Audio's long-established industrial design.

Active 2-way studio nearfield loudspeaker with two passive radiators:Shape 65 is the reference loudspeaker in the Shape series. Although it is designed for near-field monitoring, this monitor speaker offers unrivalled monitoring qualities across the entire frequency range. This monitor develops its full potential at monitoring positions of one metre and is simply a must in modern (home) studios.

The A-Series Monitor A7V is the successor to ADAM Audio's award-winning bestseller A7X. The A7V 2-way speaker is equipped with a newly developed 7-inch woofer - made from a multi-layer mineral fibre material (MLM) - and ADAM Audio's handcrafted X-ART tweeter. The A7V achieves a frequency range of 41 Hz to 42 kHz, a rotatable HPS waveguide and the integrated DSP technology allow optimal customisation to individual room conditions and personal sound preferences. For many artists, mixers and producers, the A7V will be the preferred speaker within the new A-Series.

The Genelec 8020D is a professional compact nearfield monitor. It delivers an analytical sound image without colouration for fatigue-free monitoring and objective mixing. With its small dimensions, it is suitable for small studios, post-production, broadcast and mobile applications. Protective grilles in front of the drivers simplify transport.The stable and low-resonance housing of this RAW version is made of untreated aluminium and is particularly environmentally friendly to manufacture as it is not painted. Rounded cabinet edges and the optimised sound guide ensure balanced dispersion, very good spatial imaging and a wide listening zone. The stereo image is precise and stable. Despite the small size, there is a long bass reflex channel. It enables precise and deep bass reproduction. The frequency range can be extended down to 30 Hz with the matching 7040 subwoofer.Switchable filters allow the speaker to be customised to the installation location and room acoustics. The IsoPod stand decouples the monitor from the floor and allows it to be aligned to the listening position. Threaded holes and suitable accessories facilitate wall or ceiling mounting.

The new IN-8 2nd Wave has an updated amplifier module and enables 12 dB less self-noise with a 3dB higher output. The tuning has been refined for even smoother high-frequency behaviour and the boundary EQs have been updated to enable practical settings. A new feature here is the preset for horizontal speaker positioning. Further updates include lighter transducer cones for faster transient response and an improved cabinet design for less natural resonance.As a further development of the successful LP-8, the IN-8 2nd Wave features its sophisticated bass reflex system and the same level-resistant woofer. However, instead of the usual tweeter with 3D imaging waveguides, a coaxial midrange/tweeter combination has been installed here. The profile-optimised 4″ midrange driver also functions as a waveguide. By limiting the peak excursion to 1 mm, intermodulation distortion, which otherwise occurs in coaxial systems, could be avoided. The midrange driver also relieves the woofer and tweeter, so the IN-8 2nd Wave plays more harmoniously and with less distortion than conventional 2-way studio monitors.The crossover frequency of the woofer is 280 Hz, making the IN-8 2nd Wave an acoustic point source. Phase cancellations on the vertical axis will be sought in vain here. Instead, the IN-8 2nd Wave has an even dispersion behaviour over the entire frequency response with excellent depth graduation and localisation. The stereo image also benefits from the coaxial arrangement and enables a detailed mix. Thanks to the "Boundary EQ" familiar from the LP series, the IN-8 2nd Wave can be adapted to different studio environments just as easily as its sister models.

The Genelec 8040 is a studio monitor for music production, post-production and broadcast. It enables fatigue-free monitoring and objective mixing with clearly defined bass reproduction. The stable and low-resonance housing of this RAW version is made of untreated aluminium and is particularly environmentally friendly to manufacture as it is not painted. The drivers are protected by grilles. Rounded cabinet edges and the sound guide ensure optimum spatial imaging and a wide listening zone. The bass reflex design ensures precise and deep bass reproduction down to 41 Hz.The Genelec 8040 offers high level reserves. With the two low-distortion 90-watt power amplifiers, it achieves a sound pressure level of 105 dB. It is therefore also suitable for medium-sized rooms up to approx. 30 m². Switchable filters are available to adapt the speaker to the installation location, while threaded holes and suitable accessories facilitate wall or ceiling mounting. The Genelec 8040 has an automatic switch-on and switch-off function that can be deactivated if required.Suitable subwoofers are the Genelec 7360 or 7370.