Recording & Computer

OUTBOX 8 The Outbox 8 is a versatile 8-channel audio/CV breakout box and USB host/device, designed to expand your connectivity options and open up new creative possibilities. It adds eight fully configurable physical outputs to a connected device, allowing you to send audio and CV signals in any combination that the device supports. Route your audio signal channel by channel to mixers, effects and more. Or convert MIDI to CV signals to control your modular system and other CV-controllable devices – exactly as you need. Outbox 8 is compatible with Elektron devices that support Elektron Overbridge, with USB-Class-compliant MIDI devices, and with many USB-Class-compliant audio devices. USB-MIDI support is comprehensive, whilst audio compatibility may vary depending on the manufacturer and firmware; the latest confirmed devices can be found on Elektronauts. Outbox 8 also functions as an audio interface, adding eight additional outputs to your computer. Connect your smartphone and use it as a USB audio interface with eight outputs. Route channels from your DAW to mixing desks, effects, monitors or other external hardware, and convert MIDI to CV as required.Sending audio With the Outbox 8, you can route individual tracks or submixes from your compatible Elektron device for external processing, mixing or live performance. Send CV With the Outbox 8, you can assign outputs to CV functions – Pitch, Gate, Trig, Value Line or Clock – to integrate modular and other CV-controllable devices into the same setup. MIDI to CV Use the Outbox 8 as a dedicated USB-MIDI-to-CV interface. Play, sequence, modulate and synchronise modular systems and other CV-capable instruments with your Elektron device. Or connect a MIDI controller to play and control them directly. Computer audio with eight outputs Connect the Outbox 8 to your computer, tablet or smartphone and use it as a USB audio interface with eight outputs. Route channels from your DAW to mixing desks, effects, monitors or other external hardware, and convert MIDI to CV as required.

Spectrasonics Omnisphere 3 is the new flagship software synthesiser and sets new standards for sound design, music production and film scoring. With over 26,000 patches, numerous brand new sound libraries and the innovative Quadzone modulation, Omnisphere 3 offers almost endless creative possibilities. The combination of modern synthesis, classic vintage elements such as oscillator drift and adaptive global controls makes this plug-in an indispensable tool for professionals and ambitious creatives. Thanks to extended hardware integration, MPE support and a revised browser, the workflow is more intuitive than ever before - for organic soundscapes and state-of-the-art electronic sounds in every genre.

The D3V is a fully active desktop monitor system designed for composers, producers and music lovers who want to enjoy ADAM Audio's sound quality as comfortably as possible. Available in white or black, the active monitors feature the legendary gold-coloured ribbon tweeter and remain true to ADAM Audio's established German industrial design.Each pair of active speakers features 3.5-inch aluminium bass-midrange drivers and a ferrite magnet system powered by 80-watt amplifiers. The bass-midrange drivers are complemented by double-sided 3.5-inch passive radiators, giving the D3V an extended frequency response down to 45 Hz.With 25 years of experience in the design and manufacture of ribbon tweeters, ADAM Audio has designed the compact 1.5-inch D-ART (Desktop Accelerated Ribbon Tweeter). It enables the precise, unagitated high-frequency reproduction for which the manufacturer's established monitors are known.The D3V has a USB-C input. Accordingly, the monitor system behaves like a digital output device when connected to a computer and does not require an additional audio interface for playback. This plug-and-play functionality also extends to mobile devices, so that high-quality sound reproduction can be enjoyed without the data compression or conversion typically associated with such connections. The D3V also features balanced 6.35 mm TRS inputs for conventional analogue audio applications.The rear of the left speaker has a series of user-friendly switches to solve the typical acoustic problems associated with speaker placement. The front panel also features a headphone jack and a volume control that simultaneously controls audio input selection, muting and other functions.The D3V comes complete with detachable monitor stands, which are inclined at an angle of 15° towards the user's ears. In addition, there is a standardised 3/8" thread on the underside of both monitors for mounting on microphone stands.Fully active 3.5-inch aluminium bass/midrange driver with ferrite magnet systemOptimised via ADAM Audio's state-of-the-art Klippel measurement system, the extremely symmetrical voice coils and ferrite magnets help to minimise unwanted distortion and provide a linear drive to the bass-midrange drivers. Each one-piece concave cone is made of ribbed, thick aluminium with a long linear excursion that delivers uncoloured sound even at surprisingly high output levels.The D3V is a fully active design with four amplifier channels and DSP-controlled crossover. The bass-midrange drivers are powered by 80-watt amplifiers, with the link connection cable transmitting an amplified signal to the right speaker.D-ART tweeterA quarter of a century of research and development into ribbon tweeters has led to the development of ADAM Audio's powerful 1.5" Desktop Accelerated Ribbon Tweeter. Each diaphragm is hand-folded and bonded to 40W amplifiers that drive each unit. Like all other ADAM Audio tweeters, the D-ART features a fine-tuned crossover managed by a high-precision signal processor.Passive radiatorThe D3V utilises double-sided passive radiators in each speaker, a total of four per system. Each passive radiator consists of a stainless steel plate as the moving mass and a specially stabilised long excursion rubber surround as the suspension. Together they amplify the lowest frequencies of the loudspeaker through their interaction with the main bass-midrange drivers and thus contribute to an increase in the sound pressure level of the overall system.USB-C direct inputThe D3V is ADAM Audio's most convenient monitor system to date, as it features a plug-and-play USB-C input. The speakers behave like a digital output device when connected to a computer, mobile phone or tablet, eliminating the need for an additional audio interface. This direct digital connection enables high-quality audio playback without the data compression or additional conversion typically associated with desktop monitors.DSP room acousticsThere are three switches on the rear panel of the left speaker to counteract the typical acoustic problems resulting from speaker placement. "POSITION" refers to the fixed position of the speaker in the room. "DESK" refers to the size of the desk in front of the speaker, while "ROOM" refers to the degree of acoustic damping in the room in which the system is used.Balanced analogue inputsIn addition to the USB-C input, the D3V has analogue inputs for conventional audio applications. It enables balanced connections to audio interfaces as well as direct connections to a wide range of hardware, including synthesisers, drum machines, samplers and DJ mixing consoles. The USB-C connection or the balanced analogue inputs can be selected by pressing the volume control on the left speaker.Headphone output, monitor stand and mounting optionsFunctionality and convenience played a major role in the design of the D3V. The headphone output on the front automatically takes over audio playback when connected. Monitor stands angled at 15° are also included. In addition, there is a standardised 3/8" thread on the underside of both monitors for mounting on microphone stands.Injection moulded housingThe housing of the D3V is made of high-quality ABS injection-moulded polycarbonate with thick walls and ample bracing to prevent vibrations and unwanted resonances. The rounded shape reduces unwanted sound diffraction at high frequencies while honouring ADAM Audio's long-established industrial design.

The D3V is a fully active desktop monitor system designed for composers, producers and music lovers who want to enjoy ADAM Audio's sound quality as comfortably as possible. Available in white or black, the active monitors feature the legendary gold-coloured ribbon tweeter and remain true to ADAM Audio's established German industrial design.Each pair of active speakers features 3.5-inch aluminium bass-midrange drivers and a ferrite magnet system powered by 80-watt amplifiers. The bass-midrange drivers are complemented by double-sided 3.5-inch passive radiators, giving the D3V an extended frequency response down to 45 Hz.With 25 years of experience in the design and manufacture of ribbon tweeters, ADAM Audio has designed the compact 1.5-inch D-ART (Desktop Accelerated Ribbon Tweeter). It enables the precise, unagitated high-frequency reproduction for which the manufacturer's established monitors are known.The D3V has a USB-C input. Accordingly, the monitor system behaves like a digital output device when connected to a computer and does not require an additional audio interface for playback. This plug-and-play functionality also extends to mobile devices, so that high-quality sound reproduction can be enjoyed without the data compression or conversion typically associated with such connections. The D3V also features balanced 6.35 mm TRS inputs for conventional analogue audio applications.The rear of the left speaker has a series of user-friendly switches to solve the typical acoustic problems associated with speaker placement. The front panel also features a headphone jack and a volume control that simultaneously controls audio input selection, muting and other functions.The D3V comes complete with detachable monitor stands, which are inclined at an angle of 15° in the direction of the user's ears. In addition, there is a standardised 3/8" thread on the bottom of both monitors for mounting on microphone stands.Fully active 3.5-inch aluminium bass-midrange driver with ferrite magnet systemOptimised via ADAM Audio's state-of-the-art Klippel measurement system, the extremely symmetrical voice coils and ferrite magnets help to minimise unwanted distortion and provide a linear drive to the bass-midrange drivers. Each one-piece concave cone is made of ribbed, thick aluminium with a long linear excursion that delivers uncoloured sound even at surprisingly high output levels.The D3V is a fully active design with four amplifier channels and DSP-controlled crossover. The bass-midrange drivers are powered by 80-watt amplifiers, with the link connection cable transmitting an amplified signal to the right speaker.D-ART tweeterA quarter of a century of research and development into ribbon tweeters has led to the development of ADAM Audio's powerful 1.5" Desktop Accelerated Ribbon Tweeter. Each diaphragm is hand-folded and bonded to 40W amplifiers that drive each unit. Like all other ADAM Audio tweeters, the D-ART features a fine-tuned crossover managed by a high-precision signal processor.Passive radiatorThe D3V utilises double-sided passive radiators in each speaker, a total of four per system. Each passive radiator consists of a stainless steel plate as the moving mass and a specially stabilised long excursion rubber surround as the suspension. Together they amplify the lowest frequencies of the loudspeaker through their interaction with the main bass-midrange drivers and thus contribute to an increase in the sound pressure level of the overall system.USB-C direct inputThe D3V is ADAM Audio's most convenient monitor system to date, as it features a plug-and-play USB-C input. The speakers behave like a digital output device when connected to a computer, mobile phone or tablet, eliminating the need for an additional audio interface. This direct digital connection enables high-quality audio playback without the data compression or additional conversion typically associated with desktop monitors.DSP room acousticsThere are three switches on the rear panel of the left speaker to counteract the typical acoustic problems resulting from speaker placement. "POSITION" refers to the fixed position of the speaker in the room. "DESK" refers to the size of the desk in front of the speaker, while "ROOM" refers to the degree of acoustic damping in the room in which the system is used.Balanced analogue inputsIn addition to the USB-C input, the D3V has analogue inputs for conventional audio applications. It enables balanced connections to audio interfaces as well as direct connections to a wide range of hardware, including synthesisers, drum machines, samplers and DJ mixing consoles. The USB-C connection or the balanced analogue inputs can be selected by pressing the volume control on the left speaker.Headphone output, monitor stand and mounting optionsFunctionality and convenience played a major role in the design of the D3V. The headphone output on the front automatically takes over audio playback when connected. Monitor stands angled at 15° are also included. In addition, there is a standardised 3/8" thread on the underside of both monitors for mounting on microphone stands.Injection moulded housingThe housing of the D3V is made of high-quality ABS injection-moulded polycarbonate with thick walls and ample bracing to prevent vibrations and unwanted resonances. The rounded shape reduces unwanted sound diffraction at high frequencies while honouring ADAM Audio's long-established industrial design.

A compact controller that activates Serato Studio as soon as you plug it in and gives you clearly structured access to sampling, beat programming and creative effects. The close integration with Serato software makes the device an intuitive tool for fast work - from the first sample to the finished pattern.Transport & workflow controlThe central control section bundles all the essential functions for your production flow. Play and record are available as easily recognisable, circular buttons and are based on familiar AlphaTheta operating concepts. A large rotary wheel enables browsing, precise scrubbing in audio files and parameter access. Together with the Focus mode, you can even control external plug-ins directly via the controller, without prior mapping. This ensures direct handling of sound and timing.OLED display & encoder areaThe display shows parameter values and status information in a clearly legible form. It remains clear when switching modes and its brightness can be adjusted. Four touch-sensitive encoders handle EQ, stems, effects or additional parameters - including a print function. The coloured LEDs underneath reflect software statuses and make it easier to find your way around complex projects.Performance pads & sample controlWith 16 velocity-sensitive pads including aftertouch, you have an expressive playing field for drums, melodies and FX performances. The colour-coded LED bar above each pad is based on the style of the Serato surfaces and increases visual feedback. Various pad modes - such as pad FX, piano mode or step sequencing - can be selected directly. Functions such as Auto-Set or Favourite help to quickly mark and organise samples.Touch Strip & Stems controlThe 130 mm touch strip offers sensitive control of filters, effect strengths, pitch bending, repeat rates or swing. RGB feedback ensures that every movement remains visible. The Stems Level function goes one step further: you can use the encoders to control the volume of individual components of a sample - such as vocals, drums or bass - directly in the hardware. This saves preparation time and expands creative combination options when producing or performing.Flexible use & compact designThe controller is designed for Serato Studio, but also supports Serato Sample, Serato DJ Pro and other DAWs in MIDI mode. The compact format - smaller than DIN A4 - fits easily into mobile setups. The two-tone grey, clearly separated functional areas and the USB-C cable supplied round off the well thought-out design.

The professionals' choice. PerfectedWhether you're mapping for a live performance or fine-tuning your studio setup, the Xone:K3 gives you complete control over your software and hardware environment. Compatible with existing K1 and K2 mappings, the K3 is instantly familiar to Xone K Series users and can be used as a replacement for their existing K controller.With the free Xone Controller Editor app you have full control over all functions of the K3. Assign MIDI CC and note data, define RGB feedback colours, adjust layers and save mappings to internal memory, your library or as portable files for easy sharing or backup.Unrivalled features in a compact formatThe Xone:K3 offers an unrivalled combination of tactile controls in a single device. Faders for smooth transitions, encoders and pots for precise control of all parameter types and responsive backlit buttons for performance or cueing. With 52 physical controls and 3 fully independent layers, you can assign up to 174 individual MIDI parameters - ideal for complex hybrid or live setups.Premium build quality.The Xone:K3 is housed in a robust die-cast metal chassis and designed for real-world use. With its screw-mounted pots, tactile buttons and solid construction, it is roadworthy and reliable, while its slim design means it fits perfectly next to mixing consoles in clubs or studios.Connect - Expand - Control.The Xone:K3 features both USB-C and X:Link connectivity, making it compatible with Xone mixers such as the Xone:96, PX5, 43C and 23C. Support for Star topology setups means multiple K3 devices can be connected, independently recognised by your software and named for easy control in larger setups.Class compatible - easy to set upAs a class-compatible USB MIDI device, K3 requires no drivers and works with any system that supports MIDI control: macOS, Windows, iOS and Android.