Article-No 1032450

Cordial CDX MN 3 Quad-DMX 0.7m

€76.63*

Prices incl. VAT plus shipping costs

Finanzieren Sie bequem mit Consors Finanz.
Weitere Informationen finden sie hier.

Delivery in 3-6 days

Cordial CDX MN 3 Quad-DMX 0.7m

4 XLR male 3-pin to 1 etherCON socket

Length: 0.7m


The Ethercon QUAD DMX-AES/EBU adapter utilises one pair of wires of a common 4-pair CAT cable and thus enables the cost-efficient transport of four parallel DMX or AES/EBU signals.


It is fitted with black Male NEUTRIK® XLR metal connectors in 3-pin design. The individual cables are TIA 568 A colour-coded and terminate after a 70 cm split in a special metal cable socket with strain relief and kink protection based on the well-known NEUTRIK® NE8FF.



We recommend network cables with at least one overall shield for the long distances in between. Distances of up to 150 metres are possible when using the high-quality CORDIAL CCAT 7A LONG RUN with a wire gauge of AWG 23.



An ingenious solution for rental companies and event technology service providers in the "audio and video over IP" sector to extend the utilisation possibilities of high-quality network cable reels.

Properties

Colour: Black
Connection 1: 4x XLR 3-pin male
Connection 2: RJ45
Length: 0.7 m
Cordial

Contact:

Cordial GmbH
Robert-Bosch-Str. 13
85221 Dachau

E-Mail: info@cordial-cables.com
Web: https://www.cordial-cables.com/de

0 of 0 reviews

Leave a review!

Share your experiences with other customers.


Ähnliche Artikel

Cordial CDX-2 2m
Manufacturer:
Lighting technicians and technical service providers looking for a high-quality DMX cable with 5-pin connectors and 5-pin cable assignment will find the CDX-2 to be a reliable partner for the long term.The inner workings of the CDMX-2 cable by the metre are protected from interference by a foil pair shield and a tinned copper wire braid.The CDX-2 fulfils the EIA 485 standard and DMX 512 specification. In order to withstand any load in the best possible way, Cordial paid attention to a particularly high tensile strength during development. This means that nothing can go wrong with the lighting control cable. A transparent shrink sleeve is attached to each end for individual cable labelling.Note the logic of the DMX standard: it is the reverse of the XLR logic in the audio sector. With DMX, there is a female plug on the transmitter and a male plug on the receiver.
€33.95*
Cameo cable DMX EX 001 - DMX extension cable IP65 1m
Manufacturer:
€5.90*
Accu DMX cable 110 OHM, 3 pin, 5 metres
Manufacturer:
€9.60*
Cordial CPH 5 DMX 1 PWR 1
Manufacturer:
The CPH DMX 1 PWR 1 combination cable contains a mains cable and a DMX cable in a hybrid solution.According to DMX logic, the male plug is located on the receiver and the female plug on the transmitter (opposite to the approach used for XLR in the audio sector).Optimum power supply when using the hybrid on stage or in the studio is ensured by a 3x 1.5 mm2 mains cable and a balanced AES/EBU cable.The split of the cable is 30 cm.
€76.63*
Accu ACRJ453PFM
Manufacturer:
€3.78*

Zubehör

Cordial CDX FN 3 Quad-DMX
Manufacturer:
The Ethercon QUAD DMX-AES/EBU adapter utilises one pair of wires of a common 4-pair CAT cable and thus enables the cost-efficient transport of four parallel DMX or AES/EBU signals.It is fitted with black female NEUTRIK® XLR metal connectors in 3-pin design. The individual cables are TIA 568 A colour-coded and terminate after a 70 cm split in a special metal cable socket with strain relief and kink protection based on the well-known NEUTRIK® NE8FF.We recommend network cables with at least one overall shield for the long distances in between. Distances of up to 150 metres are possible when using the high-quality CORDIAL CCAT 7A LONG RUN with a wire gauge of AWG 23.An ingenious solution for rental companies and event technology service providers in the "audio and video over IP" sector to extend the utilisation possibilities of high-quality network cable reels.
€76.63*