Article-No
0114580
Accu ACRJ453PFM
€3.90*
Prices incl. VAT plus shipping costs
Finanzieren Sie bequem mit Consors Finanz.
Weitere Informationen finden sie hier.
Weitere Informationen finden sie hier.
In stock
Accu ACRJ453PFM
RJ45 to 3 pin XLR Female
Properties
| Colour: | Black |
|---|---|
| Connection 1: | RJ45 |
| Connection 2: | XLR 3-pin female |
Accu
Contact:
ADJ Supply Europe B.V.
Junostraat 2
NL - 6468 EW Kerkrade
E-Mail: info@adj.eu
Web: https://www.adj.eu
Login
Ähnliche Artikel
Cordial CDX-2 2m
Manufacturer:
Lighting technicians and technical service providers looking for a high-quality DMX cable with 5-pin connectors and 5-pin cable assignment will find the CDX-2 to be a reliable partner for the long term.The inner workings of the CDMX-2 cable by the metre are protected from interference by a foil pair shield and a tinned copper wire braid.The CDX-2 fulfils the EIA 485 standard and DMX 512 specification. In order to withstand any load in the best possible way, Cordial paid attention to a particularly high tensile strength during development. This means that nothing can go wrong with the lighting control cable. A transparent shrink sleeve is attached to each end for individual cable labelling.Note the logic of the DMX standard: it is the reverse of the XLR logic in the audio sector. With DMX, there is a female plug on the transmitter and a male plug on the receiver.
€33.95*
Cordial CPH 5 DMX 1 PWR 1
Manufacturer:
The CPH DMX 1 PWR 1 combination cable contains a mains cable and a DMX cable in a hybrid solution.According to DMX logic, the male plug is located on the receiver and the female plug on the transmitter (opposite to the approach used for XLR in the audio sector).Optimum power supply when using the hybrid on stage or in the studio is ensured by a 3x 1.5 mm2 mains cable and a balanced AES/EBU cable.The split of the cable is 30 cm.
€79.00*
Adam Hall DMX cable adapter XLR 5 M - XLR 3 F
Manufacturer:
24 AWG cables may be used for distances of up to 300 metres. For longer distances, or if more than 32 devices are to be supplied by one data line, we recommend using the Martin Optosplitter.Terminating resistor The data line must be terminated with a 120 Ohm resistor between Signal+ and Signal-. This is very important for error-free data transmission. When using a splitter, each data line must be terminated. The easiest way to terminate a data line is to use a termination plug (120 Ohm resistor between pins 2 and 3) on the data output of the last device on the data line.
€5.90*
Last seen products
Sequence Synthesiser Bag
Manufacturer: Korg
This stylish bag from SEQUENZ offers more than enough storage space for a medium-sized synthesiser with 37 keys, a standard DJ controller, a multi-effects board or a large laptop with the corresponding accessories, and is significantly lighter and easier to handle than a suitcase or hard case.The MP-LARGE-MSG is perfect for KORG wavestate, opsix, modwave, minilogue, minilogue xd etc., but also for numerous compact synthesisers from other manufacturers as well as DJ controllers, multi-effects boards and other equipment. Its generous padding provides the necessary protection when travelling.A padded inner compartment (perfect for a laptop) and a front compartment with a zip (e.g. for cables and adapters) also offer additional storage space and thus provide a better overview - especially when things need to be done quickly during set-up and dismantling.
€49.00*
Percussion CP85 Rudiments Styles large
Manufacturer: Percussion
The entry-level series "Rudiments" from Schlagwerk offers several design variations in addition to the usual handmade quality made in Germany. Whether rock, alternative, independent, blues, jazz or hip-hop. Be independent - everything is possible with this Cajon.
€119.00*