Shure SM7dB

The new WA-MBA is a professional broadcast microphone boom for radio, television, studio and home use with a robust design. Thanks to easy-to-operate clamping hinges, it enables the microphone to be positioned securely in any position for the best possible sound quality. The internal cable management system allows invisible cable routing for a visually appealing workplace.

The DM1 DYNAMITE is an active inline preamplifier that is connected between a passive ribbon or dynamic microphone and a microphone preamplifier. The DM1 offers a gain of +28dB, making it the perfect solution for amplifying the signal of a passive microphone, reducing the occurrence of interference and significantly increasing the preamplification - without adding noise or colouration With a sophisticated Class A design and specially selected high-quality FET transistors, the DM1 has the lowest self-noise in its class. In addition, the dedicated output isolation amplifier offers a constant gain of 28 dB, regardless of the connected load. Its output impedance is also the lowest in its class, allowing it to run long cable runs while reducing susceptibility to RF interference, hum and noise.The roadworthy and slim all-metal design, robust construction and high manufacturing standards ensure reliable operation even in demanding applications on stage in difficult environments.

The DM2 T.N.T is an active inline preamplifier based on the design of the sE DM1, but offering even more gain and less noise with greater flexibility. The integrated, recessed switch allows you to select a clean, transparent gain of a moderate 15 dB or an explosive 30 dB - more headroom and an extremely clean signal, with an ultra-high impedance input and eight selectable load settings to perfectly match any microphone. It is suitable for direct connection to the output of a passive ribbon or dynamic microphone, eliminating the need for an additional cable.Switchable, clean gain from a moderate 15 dB to an explosive 30 dB:Two amplifier stages provide even greater flexibility with different microphones, designed for neutral, balanced sound quality and extremely low noise. The uncompromising design amplifies the signal regardless of load impedance or cable length. The DM2 T.N.T can be perfectly combined with any passive microphone, boosts the signal, reduces the occurrence of interference and provides a significantly better level for the preamplifier of the audio interface / mixer - all without noise and colouration!Get the best out of the microphone thanks to the variable input load:Conventional inline preamps tend to load the transducers of passive microphones due to their electronic design, resulting in a degradation of sound quality and output level. The ultra-high impedance input of the DM2 T.N.T promises the best possible signal quality, regardless of the load of the microphone. The selectable impedance of the DM2 invites experimentation - it can be adjusted from an unconventionally low 50 to an astonishingly high 10 M to match the preamp to any microphone and achieve a clean recording with the lowest possible noise. The DM2 T.N.T was developed to bring out the best sound characteristics of each microphone.Sophisticated Class A electronics with additional output stage:With a sophisticated electronic design and specially selected high-quality FET transistors, the DM2 T.N.T has the lowest self-noise in its class and enables effortless studio-quality recordings. Unlike other commercially available inline preamplifiers, the DM2 T.N.T delivers a constant gain of +15 dB / +30 dB regardless of the connected load. An ideal tool for sound engineers, the DM2 T.N.T's output impedance is also the lowest in its class, allowing it to handle long cable runs with ease while reducing susceptibility to RF interference, hum and noise.Slim, robust all-metal housing with premium finish:Even in the most demanding environments, the DM2 T.N.T scores with a stage-ready and sleek all-metal design, robust construction, high-quality manufacturing standards and a gold-plated XLR connector for reliable lossless signal connection, whether on stage or in the studio. With its exceptionally practical, phantom-powered design that requires no external power supply, the sE DM2 T.N.T is the ultimate game changer in your pro audio arsenal.

The must-have tool for ribbon and dynamic microphones!The Cloudlifter CL-1 is a simple and easy-to-use tool for solving common problems in recording studios or live applications. The Cloudlifter was developed for use with all passive microphones, including ribbon microphones. The Cloudlifter CL-1 works safely with any phantom-powered microphone and provides an extremely clean and amplified level of up to 25 dB.With the help of the Cloudlifter CL-1, the performance of passive microphones can be significantly increased even when long cable runs are required. Thanks to the clean and amplified audio signal provided by the Cloud Cloudlifter, they are equally suitable for broadcast, live and studio applications. The patented Cloudlifter technology is enclosed in a robust steel housing and provides excellent shielding against external interference factors. With the supplied strap, the Cloudlifter CL-1 can be easily attached to suitable locations in any conceivable environment (e.g. live on stage).The Cloudlifter CL-1 works on the basis of patented technologies that leave the signal path completely free of transformers, capacitors or transformers. The CL-1 contains a discrete JFET circuit that provides exemplary amplification without sacrificing the natural sound characteristics of the microphone.Cloud Cloudlifters are used to optimise the signal-to-noise ratio and improve the performance of passive microphone/preamplifier combinations. The high flexibility and reliability allows many other applications, such as:When recording directly into the DAW:Using inadequate microphone preamps and low-power microphone amplifiersWhen using dynamic microphones with low output powerWhen miking weak sound sources, e.g. acoustic instruments or voices and vocalsTo reduce noise and amplify signals when long cable runs are required