SE electronics DM1 Dynamite

The DM2 T.N.T is an active inline preamplifier based on the design of the sE DM1, but offering even more gain and less noise with greater flexibility. The integrated, recessed switch allows you to select a clean, transparent gain of a moderate 15 dB or an explosive 30 dB - more headroom and an extremely clean signal, with an ultra-high impedance input and eight selectable load settings to perfectly match any microphone. It is suitable for direct connection to the output of a passive ribbon or dynamic microphone, eliminating the need for an additional cable.Switchable, clean gain from a moderate 15 dB to an explosive 30 dB:Two amplifier stages provide even greater flexibility with different microphones, designed for neutral, balanced sound quality and extremely low noise. The uncompromising design amplifies the signal regardless of load impedance or cable length. The DM2 T.N.T can be perfectly combined with any passive microphone, boosts the signal, reduces the occurrence of interference and provides a significantly better level for the preamplifier of the audio interface / mixer - all without noise and colouration!Get the best out of the microphone thanks to the variable input load:Conventional inline preamps tend to load the transducers of passive microphones due to their electronic design, resulting in a degradation of sound quality and output level. The ultra-high impedance input of the DM2 T.N.T promises the best possible signal quality, regardless of the load of the microphone. The selectable impedance of the DM2 invites experimentation - it can be adjusted from an unconventionally low 50 to an astonishingly high 10 M to match the preamp to any microphone and achieve a clean recording with the lowest possible noise. The DM2 T.N.T was developed to bring out the best sound characteristics of each microphone.Sophisticated Class A electronics with additional output stage:With a sophisticated electronic design and specially selected high-quality FET transistors, the DM2 T.N.T has the lowest self-noise in its class and enables effortless studio-quality recordings. Unlike other commercially available inline preamplifiers, the DM2 T.N.T delivers a constant gain of +15 dB / +30 dB regardless of the connected load. An ideal tool for sound engineers, the DM2 T.N.T's output impedance is also the lowest in its class, allowing it to handle long cable runs with ease while reducing susceptibility to RF interference, hum and noise.Slim, robust all-metal housing with premium finish:Even in the most demanding environments, the DM2 T.N.T scores with a stage-ready and sleek all-metal design, robust construction, high-quality manufacturing standards and a gold-plated XLR connector for reliable lossless signal connection, whether on stage or in the studio. With its exceptionally practical, phantom-powered design that requires no external power supply, the sE DM2 T.N.T is the ultimate game changer in your pro audio arsenal.

AudioFuse X8 OUT is an ADAT expander that adds 8 high-quality line outputs to existing audio interfaces and expands the connection options of existing setups to the highest studio quality.The AudioFuse X8 OUT is an indispensable tool for producers, sound engineers and live musicians who are looking for additional high-quality analogue outputs. By expanding digital-analogue connectivity, the AudioFuse X8 OUT provides more channels to support complex signal paths for live setups or external audio workflows in the studio. It increases the flexibility and scalability of your studio without sacrificing audio quality and fulfils the highest sonic demands.Specifically, an 8-channel ADAT-to-analogue output expander allows you to send audio signals to external equipment (hardware effects, modular systems, mixing consoles, etc.), add additional speakers and control a variety of synthesizers via DC-coupled outputs.Efficient expansion:The AudioFuse X8 OUT provides 8 additional line outputs via ADAT, expanding the connectivity of your existing audio setup without the unnecessary cost and hassle of another full-featured audio interface.Professional audio quality:The AudioFuse X8 OUT supports 8 channels of ADAT to analogue conversion at the highest quality up to 96 kHz and uses the best components on the market to ensure that your recordings and outputs maintain the highest fidelity.Flexible use:The AudioFuse X8 Out is designed as a half-rack unit and allows flexible use both as a desktop unit and for mounting two AudioFuse X8 units in a 19-rack.Robust construction:The AudioFuse X8 OUT was developed for tough studio and live use and has simple controls on the front, a robust mains connection and stable jack outputs.

AudioFuse X8 IN is an ADAT expander that adds 8 high-quality line inputs to existing audio interfaces and expands the connection options of existing setups to the highest studio quality.The AudioFuse X8 IN is an indispensable tool for producers, sound engineers and live musicians who are looking for additional high-quality analogue inputs. By expanding analogue-digital connectivity, the AudioFuse X8 IN offers more channels for instruments and external equipment. It increases the flexibility and scalability of your studio without sacrificing audio quality and fulfils the highest sonic demands.In particular, an 8-channel analogue-to-ADAT input expander allows you to expand your synth and instrument setup so that all your equipment is connected and ready to record in your DAW at the same time.Efficient expansion:The AudioFuse X8 IN provides 8 additional analogue line inputs and improves the connectivity of your existing audio setup without the unnecessary cost and hassle of another full-featured audio interface.Professional audio quality:The AudioFuse X8 IN supports 8 channels of premium analogue-to-ADAT conversion at up to 96 kHz and uses the best components available to ensure your recordings maintain the highest fidelity.Flexible use:The AudioFuse X8 IN is designed as a half rack unit and allows flexible use both as a desktop device and for mounting two AudioFuse X8 units in a 19-rack.Simple operation:Front panel controls provide direct access to channel management, making setup and adjustments straightforward. Coloured LEDs also provide visual feedback for level monitoring.

The DM1 DYNAMITE is an active inline preamplifier that is connected between a passive ribbon or dynamic microphone and a microphone preamplifier. The DM1 offers a gain of +28dB, making it the perfect solution for amplifying the signal of a passive microphone, reducing the occurrence of interference and significantly increasing the preamplification - without adding noise or colouration With a sophisticated Class A design and specially selected high-quality FET transistors, the DM1 has the lowest self-noise in its class. In addition, the dedicated output isolation amplifier offers a constant gain of 28 dB, regardless of the connected load. Its output impedance is also the lowest in its class, allowing it to run long cable runs while reducing susceptibility to RF interference, hum and noise.The roadworthy and slim all-metal design, robust construction and high manufacturing standards ensure reliable operation even in demanding applications on stage in difficult environments.