Skip to main content Skip to search Skip to main navigation
Go to homepage
Major DMX Node 1 V2

Ethernet/DMX converter for 1 universe

DMX-Out/In functionality via Art-Net and sACN

Compatible with all operating systems with Ethernet network support

Compact and robust design

Simple power supply via USB

RDM via Art-Net (with future firmware)

With the Major DMX-Node 1, Ethernet data can be quickly and easily converted into DMX and vice versa. The Major DMX-Node 1 supports both Art-Net and sACN. The XLR connection can be configured as an output or input for a DMX universe.


The Major DMX-Node 1 has a small and robust metal housing and is supplied with power via a USB connection. Configuration options for the node, such as setting the IP address or the network protocol, are provided via simple, free software. The software also includes a simple Art-Net output/input tester and the option to install firmware updates.

Major

Ansprechpartner:

Lightpower GmbH
An der Talle 24-28
33102 Paderborn

E-Mail: sales@lightpower.de
Web: https://www.lightpower.de/

    Sicherheits- und Warnhinweise:

    Dieses Produkt enthält elektronische Bauteile und/oder wird mit elektrischer Energie betrieben.

    Bitte verwenden Sie es ausschließlich gemäß der Bedienungsanleitung und mit geeignetem Zubehör.

    ⚠️ Schützen Sie das Gerät vor Feuchtigkeit, extremen Temperaturen und mechanischer Beschädigung.

    Prüfen Sie Kabel, Netzteile und Anschlüsse regelmäßig auf sichtbare Schäden.

 

    ℹ️ Weitere sicherheitsrelevante Hinweise entnehmen Sie bitte der beiliegenden Bedienungsanleitung.

    ℹ️ Bei Fragen zur sicheren Verwendung wenden Sie sich gerne an unseren Kundenservice.

0 of 0 reviews

Average rating of 0 out of 5 stars

Leave a review!

Share your experiences with other customers.


Zubehör

Adam Hall DMX cable adapter XLR 5 M - XLR 3 F
Manufacturer:
24 AWG cables may be used for distances of up to 300 metres. For longer distances, or if more than 32 devices are to be supplied by one data line, we recommend using the Martin Optosplitter.Terminating resistor The data line must be terminated with a 120 Ohm resistor between Signal+ and Signal-. This is very important for error-free data transmission. When using a splitter, each data line must be terminated. The easiest way to terminate a data line is to use a termination plug (120 Ohm resistor between pins 2 and 3) on the data output of the last device on the data line.
€5.90*