Adam Hall DMX cable adapter XLR 5 M - XLR 3 F

Article-No 0114573

Adam Hall DMX cable adapter XLR 5 M - XLR 3 F

€5.90*

Prices incl. VAT plus shipping costs

Finanzieren Sie bequem mit Consors Finanz.
Weitere Informationen finden sie hier.

Cheaper elsewhere?

In stock

Adam Hall DMX cable adapter XLR 5 M - XLR 3 F

Cable adapter

XLR 5 pole male

XLR 3 pole female

24 AWG cables may be used for distances of up to 300 metres. For longer distances, or if more than 32 devices are to be supplied by one data line, we recommend using the Martin Optosplitter.

Terminating resistor The data line must be terminated with a 120 Ohm resistor between Signal+ and Signal-. This is very important for error-free data transmission. When using a splitter, each data line must be terminated. The easiest way to terminate a data line is to use a termination plug (120 Ohm resistor between pins 2 and 3) on the data output of the last device on the data line.

Properties

Colour:	Black
Connection 1:	XLR 3-pin female
Connection 2:	XLR 5-pin male
Length:	5 m

Adam Hall

Contact:

Adam Hall GmbH
Adam-Hall-Str. 1
61267 Neu-Anspach

E-Mail: info@adamhall.com
Web: https://www.adamhall.com/de-de

0 of 0 reviews

Leave a review!

Share your experiences with other customers.

Login

Your email address

Your password

No reviews found. Share your insights with others.

Ähnliche Artikel

Cordial CDX-2 2m

Manufacturer:

Lighting technicians and technical service providers looking for a high-quality DMX cable with 5-pin connectors and 5-pin cable assignment will find the CDX-2 to be a reliable partner for the long term.The inner workings of the CDMX-2 cable by the metre are protected from interference by a foil pair shield and a tinned copper wire braid.The CDX-2 fulfils the EIA 485 standard and DMX 512 specification. In order to withstand any load in the best possible way, Cordial paid attention to a particularly high tensile strength during development. This means that nothing can go wrong with the lighting control cable. A transparent shrink sleeve is attached to each end for individual cable labelling.Note the logic of the DMX standard: it is the reverse of the XLR logic in the audio sector. With DMX, there is a female plug on the transmitter and a male plug on the receiver.

€33.95*

Cameo cable DMX EX 001 - DMX extension cable IP65 1m

Manufacturer:

€5.90*

Accu DMX cable 110 OHM, 3 pin, 5 metres

Manufacturer:

€9.90*

Cordial CPH 5 DMX 1 PWR 1

Manufacturer:

The CPH DMX 1 PWR 1 combination cable contains a mains cable and a DMX cable in a hybrid solution.According to DMX logic, the male plug is located on the receiver and the female plug on the transmitter (opposite to the approach used for XLR in the audio sector).Optimum power supply when using the hybrid on stage or in the studio is ensured by a 3x 1.5 mm2 mains cable and a balanced AES/EBU cable.The split of the cable is 30 cm.

€79.00*

Accu ACRJ453PFM

Manufacturer:

€3.90*

Last seen products

Roland Fantom-07

Manufacturer: Roland

The FANTOM-0 brings your creative world together by offering the sonic performance and fluid workflow of the FANTOM series in a sleek instrument that takes you wherever your inspiration takes you. Equipped with a 61-, 76- or 88-note keyboard, the FANTOM-0 series offers everything you need to create and perform at the highest level. Play and produce with thousands of Roland's best sounds and unleash your musical vision with the same colour touchscreen, convenient controls and deep computer integration.

€1,529.00*