The Profile Wireless 1-Channel Set includes the essential components that content creators and film makers need to create high-quality audio recordings: a 2.4 GHz two-channel receiver, a clip-on microphone, extensive mounting and connection accessories and a carrying bag.
The MV6 incorporates all our knowledge of dynamic microphones. The result is an easy-to-use USB microphone all-in-one package that's ready to go. The MV6 is inspired by the design and technology of our legendary SM7 and MV7 microphones to help gamers and streamers take their first step into Shure dynamic microphones and sound like a pro.
The world's first standalone headphone correction systemCorrecting both tonal imbalance and spatial separation when listening to headphones is a challenge in itself. Combining these functions in a portable, standalone hardware device is a speciality. ARC ON-EAR is a studio-quality transducer and headphone amplifier that integrates both headphone calibration and studio simulation. It enables consistently accurate, speaker-like reproduction without the need for plugins, a software host or a DAW.The device can store up to five presets in its internal memory, which can be recalled instantly. This makes ARC ON-EAR a stand-alone headphone correction system that can be used with almost any headphone model. Using a state-of-the-art measurement system from GRAS Acoustics, ARC ON-EAR captures the fine frequency response of each supported headphone model - taking into account the interaction of the drivers with the ear canal and the structures of the middle ear. These manually created profiles (over 250 to start with) form the basis of ARC ON-EAR's high-resolution calibration engine. It corrects tonal colourations for precise perception. This means that headphones can be used with the same reliability as tried and tested studio monitors.One of the biggest challenges when mixing with headphones is spatial in nature: the drivers are positioned at a 180 degree angle to the ears, resulting in an unnaturally wide stereo image and a lack of spatial information. This makes decisions about reverberation, panorama and stereo width particularly difficult. ARC ON-EAR solves this problem with a specially developed crossfeed algorithm and a model for early reflections. The basis is psychoacoustic research, not convolution reverb. The result is a credible stereo image - comparable to listening through loudspeakers in a well-tuned room - without artificial colouration or listening fatigue.Despite its compact design, ARC ON-EAR offers uncompromising audio quality, made possible by carefully selected high-end components. At its core is the ES9290 DAC, which ensures first-class digital-to-analogue conversion with a dynamic range of 116 dB and -110 dB THD+N. To maintain resolution even at low volumes, ARC ON-EAR uses digitally controlled analogue volume control. This ensures that the full bit depth is maintained at any volume level. In combination with a powerful headphone amplifier with 200 mW output power, even demanding studio headphones can be driven effortlessly and precisely.Operation of ARC ON-EAR is simple and intuitive thanks to the ARC ON-EAR Control software. Each of the five integrated presets saves the headphone model used, the calibration profile, the studio simulation settings and the assignment of the FN button. The FN button can be individually assigned for common functions such as muting, dimming or quick A/B comparison, making everyday use particularly convenient. With support for both digital (USB-C) and analogue (3.5 mm) inputs, a rechargeable battery (up to 4 hours runtime) and a compact, travel-friendly design, ARC ON-EAR integrates seamlessly into any workflow - whether in the studio, on the move or in remote operation.
The Shure SM4 is a home studio microphone that enables professional recording of vocals and instruments with mix-ready audio and effective noise cancellation. The 1-inch brass dual-diaphragm capsule is designed to capture your performance with high accuracy and excellent low-frequency control. Patent-pending interference shielding technology reduces unwanted high-frequency noise from wireless devices. The low-profile design and all-metal construction make it an ideal addition to the home studio. A high-quality magnetic pop filter ensures plosive-free audio and is available separately.
The V7 ENG from sE Electronics is a dynamic microphone based on the proven sE V7 and was developed specifically for broadcast applications. For almost a decade, the V7 has delivered clarity, detail and reliability on stage and in the studio. With the V7 ENG, this heritage is now being transferred to the demands of ENG/EFP, field reporting and interviews.Since its introduction, the sE Electronics V7 has set the standard: a dynamic microphone that has inspired musicians, creatives and sound engineers worldwide. With its unmistakable clarity, detail and robustness, it has long been a modern classic on stage, in studios and with content producers. Now sE Electronics is extending this legacy - with the new V7 ENG, a version specially developed for broadcast and reportage.
Particularly convenient monitoring via SonicLink with wireless sound and extremely low latency With the HDJ-F10 system, you can enjoy total freedom in the DJ booth or on stage. Thanks to the unique SonicLink technology, it is possible to move around freely while DJing without being tied to headphone cables. Conventional Bluetooth connections lead to a considerable delay in audio transmission, which is unfavourable for DJ monitoring. However, by connecting the special HP-TX01 transmitter to a DJ mixer, the SonicLink connection is available for seamless mixing pleasure. SonicLink transmits signals with a latency of just 9 ms - 20 times faster than the commonly used Bluetooth SBC codec. Delays of this magnitude go unnoticed - and allow precise monitoring and mixing. The transmitter is compact, lightweight and easy to transport with the rest of your equipment.High volume reserves and sound attenuation - for precise monitoring in any environmentWith the SonicLink wireless connection, you can hear music loud and clear, even in an extremely loud DJ booth or on stage. The headphones offer high-quality sound reproduction even at high levels. Thanks to newly developed ear pads and housing structures, it achieves outstanding sound insulation that surpasses even the Pioneer DJ flagship HDJ-X10.Crisp kick sound and wide frequency rangeThe HDJ-F10 is the AlphaTheta brand's flagship headphones, developed with a particular focus on sound quality. The newly developed 40 mm driver has a PEEK-PU-PEEK composite diaphragm made of two different materials, which ensures a high-resolution sound from the low to the high frequencies: even the smallest details in the music can be heard clearly. The cabinet design combines a bass reflex channel and an air chamber to ensure a high level of sound insulation while extending and amplifying low frequencies. This means you can hear crisp, punchy kick sounds even in a loud DJ booth. But it also makes it possible to work at studio level in a variety of situations, from DJing and music production to listening to tracks in preparation for gigs.Robust for professional useThe HDJ-F10 headphones can be used in any environment. They are extremely robust and have passed the strict US military standard MIL-STD-810H shock test.Bluetooth and noise cancelling mode - for a complete DJ workflowWith the active noise cancelling mode and the transparency mode, you are equipped for all scenarios. When preparing tracks, you can choose whether you want to reduce the ambient noise or let it pass as long as the headphones are connected to a device via Bluetooth. In noise cancelling mode, ambient noise can be blocked out - even in a busy city. This allows you to enjoy music as if you were listening directly in the studio. In transparency mode, external noises remain unaffected so that you can continue to talk to the people around you while listening to music.Long battery life for long DJ setsYou can rely on these headphones to keep going even during long DJ sets. With a full battery, you can work for nine hours via SonicLink or 30 hours via Bluetooth. If you prefer a more classic set, simply use the cable as an alternative.
MoveMic is the new wireless microphone system for content creation, vlogging and mobile reporting. Unleash your creativity: With the compact and powerful MoveMic, you can record audio directly to your smartphone for up to 24 hours at a time. MoveMic has an impressive battery life of up to 8 hours per microphone - and with the case with charging function, you'll be able to record for up to 24 hours in total on the go. Get the most out of your MoveMic with the free ShurePlus MOTIV apps for VIDEO and AUDIO recording. Customise the audio settings such as gain, limiter, compression, noise reduction and EQ.