Neumann KH 310 A left aktiver Studiomonitor -Stückpreis- (Retoure)

The D3V is a fully active desktop monitor system designed for composers, producers and music lovers who want to enjoy ADAM Audio's sound quality as comfortably as possible. Available in white or black, the active monitors feature the legendary gold-coloured ribbon tweeter and remain true to ADAM Audio's established German industrial design.Each pair of active speakers features 3.5-inch aluminium bass-midrange drivers and a ferrite magnet system powered by 80-watt amplifiers. The bass-midrange drivers are complemented by double-sided 3.5-inch passive radiators, giving the D3V an extended frequency response down to 45 Hz.With 25 years of experience in the design and manufacture of ribbon tweeters, ADAM Audio has designed the compact 1.5-inch D-ART (Desktop Accelerated Ribbon Tweeter). It enables the precise, unagitated high-frequency reproduction for which the manufacturer's established monitors are known.The D3V has a USB-C input. Accordingly, the monitor system behaves like a digital output device when connected to a computer and does not require an additional audio interface for playback. This plug-and-play functionality also extends to mobile devices, so that high-quality sound reproduction can be enjoyed without the data compression or conversion typically associated with such connections. The D3V also features balanced 6.35 mm TRS inputs for conventional analogue audio applications.The rear of the left speaker has a series of user-friendly switches to solve the typical acoustic problems associated with speaker placement. The front panel also features a headphone jack and a volume control that simultaneously controls audio input selection, muting and other functions.The D3V comes complete with detachable monitor stands, which are inclined at an angle of 15° in the direction of the user's ears. In addition, there is a standardised 3/8" thread on the bottom of both monitors for mounting on microphone stands.Fully active 3.5-inch aluminium bass-midrange driver with ferrite magnet systemOptimised via ADAM Audio's state-of-the-art Klippel measurement system, the extremely symmetrical voice coils and ferrite magnets help to minimise unwanted distortion and provide a linear drive to the bass-midrange drivers. Each one-piece concave cone is made of ribbed, thick aluminium with a long linear excursion that delivers uncoloured sound even at surprisingly high output levels.The D3V is a fully active design with four amplifier channels and DSP-controlled crossover. The bass-midrange drivers are powered by 80-watt amplifiers, with the link connection cable transmitting an amplified signal to the right speaker.D-ART tweeterA quarter of a century of research and development into ribbon tweeters has led to the development of ADAM Audio's powerful 1.5" Desktop Accelerated Ribbon Tweeter. Each diaphragm is hand-folded and bonded to 40W amplifiers that drive each unit. Like all other ADAM Audio tweeters, the D-ART features a fine-tuned crossover managed by a high-precision signal processor.Passive radiatorThe D3V utilises double-sided passive radiators in each speaker, a total of four per system. Each passive radiator consists of a stainless steel plate as the moving mass and a specially stabilised long excursion rubber surround as the suspension. Together they amplify the lowest frequencies of the loudspeaker through their interaction with the main bass-midrange drivers and thus contribute to an increase in the sound pressure level of the overall system.USB-C direct inputThe D3V is ADAM Audio's most convenient monitor system to date, as it features a plug-and-play USB-C input. The speakers behave like a digital output device when connected to a computer, mobile phone or tablet, eliminating the need for an additional audio interface. This direct digital connection enables high-quality audio playback without the data compression or additional conversion typically associated with desktop monitors.DSP room acousticsThere are three switches on the rear panel of the left speaker to counteract the typical acoustic problems resulting from speaker placement. "POSITION" refers to the fixed position of the speaker in the room. "DESK" refers to the size of the desk in front of the speaker, while "ROOM" refers to the degree of acoustic damping in the room in which the system is used.Balanced analogue inputsIn addition to the USB-C input, the D3V has analogue inputs for conventional audio applications. It enables balanced connections to audio interfaces as well as direct connections to a wide range of hardware, including synthesisers, drum machines, samplers and DJ mixing consoles. The USB-C connection or the balanced analogue inputs can be selected by pressing the volume control on the left speaker.Headphone output, monitor stand and mounting optionsFunctionality and convenience played a major role in the design of the D3V. The headphone output on the front automatically takes over audio playback when connected. Monitor stands angled at 15° are also included. In addition, there is a standardised 3/8" thread on the underside of both monitors for mounting on microphone stands.Injection moulded housingThe housing of the D3V is made of high-quality ABS injection-moulded polycarbonate with thick walls and ample bracing to prevent vibrations and unwanted resonances. The rounded shape reduces unwanted sound diffraction at high frequencies while honouring ADAM Audio's long-established industrial design.

The new IN-8 2nd Wave has an updated amplifier module and enables 12 dB less self-noise with a 3dB higher output. The tuning has been refined for even smoother high-frequency behaviour and the boundary EQs have been updated to enable practical settings. A new feature here is the preset for horizontal speaker positioning. Further updates include lighter transducer cones for faster transient response and an improved cabinet design for less natural resonance.As a further development of the successful LP-8, the IN-8 2nd Wave features its sophisticated bass reflex system and the same level-resistant woofer. However, instead of the usual tweeter with 3D imaging waveguides, a coaxial midrange/tweeter combination has been installed here. The profile-optimised 4″ midrange driver also functions as a waveguide. By limiting the peak excursion to 1 mm, intermodulation distortion, which otherwise occurs in coaxial systems, could be avoided. The midrange driver also relieves the woofer and tweeter, so the IN-8 2nd Wave plays more harmoniously and with less distortion than conventional 2-way studio monitors.The crossover frequency of the woofer is 280 Hz, making the IN-8 2nd Wave an acoustic point source. Phase cancellations on the vertical axis will be sought in vain here. Instead, the IN-8 2nd Wave has an even dispersion behaviour over the entire frequency response with excellent depth graduation and localisation. The stereo image also benefits from the coaxial arrangement and enables a detailed mix. Thanks to the "Boundary EQ" familiar from the LP series, the IN-8 2nd Wave can be adapted to different studio environments just as easily as its sister models.

The powerful JBL 305P MkII studio monitor brings the legendary JBL audio experience to any studio. Featuring the revolutionary JBL Image Control Waveguide and enhanced transducers, the JBL 305P MkII delivers stunning detail, precise imaging, an expanded sweet spot and impressive dynamic range to enhance the playback experience in any modern workplace.Utilising patented technologies from the JBL 7 Series and M2 Master Reference Monitors, the sleek, modern design makes the JBL 305P MkII an extremely powerful and enjoyable mixing experience at an affordable entry-level price.

Focal is expanding its Alpha series with the newly launched Alpha Evo. New features, new technologies, new design: the Alpha 50 Evo and Alpha 65 Evo studio monitors offer high performance at an unrivalled price in their market segment, making them the professional tools of choice for more people than ever before. With these new products, the French manufacturer is once again demonstrating its sound expertise and asserting its position as world market leader.PERFORMANCE & VERSATILITY:The Alpha 50 Evo and Alpha 65 Evo models are specially designed for music production and general music reproduction and ensure outstanding acoustic coherence regardless of the listening location. To further improve reproduction performance, Focal has opted for an aluminium tweeter with an inverted dome for wide sound dispersion and a carbon fibre cone. The recycled carbon fibre cone is manufactured exclusively by the French brand in Saint-Étienne and was chosen for its neutrality and dynamics. Focal is constantly revising its product range, drawing on over 40 years of expertise in the field of acoustics and its innovative strength. This is also underlined by the new large laminar port, which minimises distortion.NEW FEATURES:Evo stands for evolution. In addition to the analogue XLR and RCA sockets, the Alpha Evo monitors have a new TRS jack input (6.35 mm), an automatic standby mode that can be deactivated and inserts for wall and ceiling mounting: a truly versatile range (mixing, mastering, DJ, broadcasting). In terms of amplification, the speakers each have two Class D amplifiers. Their high current capacity gives you maximum control over the signal dynamics. In addition, high volumes can be achieved without distortion. Each speaker reproduces even the smallest details in the mix across all styles of music.DESIGN AND CABINET CONSTRUCTION:The monitors have a 15 mm thick MDF enclosure with internal bracing for maximum stability even at high sound pressure levels. The bass reflex design was chosen for easy acoustic integration even in the tightest of spaces. In terms of aesthetics, the classic cube shape of the monitor gives way to a design with rounded corners. The side panels ensure a sophisticated, robust and modern design that contributes to excellent acoustics and a unique and harmonious character across the entire range.