DPA 4266-OC-F-B00-LE

Directional pattern: Omnidirectional

Operating principle: Pressure

Capsule type: Pre-polarised condenser

Effective frequency response: 20 Hz - 20 kHz

Frequency range +/- 2 dB: Soft boost grid: 20 Hz - 20 kHz, 3 dB soft boost at 8 - 20 kHz. High boost grid: 20 Hz - 20 kHz, 10 dB boost at 12 kHz

Nominal sensitivity: +/-3 dB at 1 kHz: 6 mV / Pa; -44 dB re. 1 V / Pa

Equivalent noise level, A-weighted: Typ. 26 dB (A) re. 20 uPa (max. 28 dB (A))

Equivalent noise level, ITU-R BS.468-4: Typ. 38 dB (max. 40 dB)

Distortion, THD <1% - CORE: 134 dB SPL RMS, 137 dB SPL peak

Dynamic range - CORE: Typ. 111 dB

Max. Sound pressure, THD 10%: 144 dB sound pressure peak

Rated output impedance: From MicroDot: 30 - 40 . From DAD6001: 100

Cable drive capability: Up to 300 m (984 ft) with DAD6001-BC XLR adapter

Output balance principle: Signal equalisation with DAD6001-BC XLR adapter

Common mode rejection ratio (CMRR): > 60 dB from 50 Hz to 15 kHz with DAD6001-BC XLR adapter

Power supply (for full power): min. 5 V to max. 50 V to DPA adapter for wireless systems

Power consumption: Typ. 1.5 mA (microphone). 3.5 mA with DAD6001-BC XLR adapter

Connection: MicroDot

Colour: black

Weight: 10 g (0.35 oz)

Microphone diameter: 5.4 mm (0.21 in)

Microphone length: 12.7 mm

Cable length: 1.25 m (4.1 ft)

Cable colour: Black, beige or brown

Cable diameter: 1.6 mm (0.06 in)

Polarity: A positive increasing sound pressure generates a positive voltage on the MicroDot pin (and pin 2 on the DAD6001 XLR adapter).

Temperature range: -40° C to 45° C (-40° F to 113° F)

Relative humidity (RH): Up to 90%