Skip to main content Skip to search Skip to main navigation
Go to homepage
DPA 4188-DC-F-F10-LH

Polar pattern: Cardioid

Operating principle: Pressure gradient

Cartridge type: Pre-polarised condenser

Frequency range: 20 Hz - 20 kHz

Sensitivity, nominal, +/-3 dB at 1 kHz: 6 mV / Pa; -44 dB re. 1 V / Pa

Equivalent noise level, A-weighted: Typ. 26 dB (A) to 20 μPa (max. 28 dB (A))

Equivalent noise level, ITU-R BS.468-4: Typ. 38 dB (max. 40 dB)

S / N ratio (A-weighted), re. 1 kHz at 1 Pa (94 dB SPL) Typ. 68 dB (A)

Total harmonic distortion (THD): <1% up to 123 dB SPL peak, <1% up to 120 dB SPL RMS sine wave

Dynamic range: Typ. 95 dB

Max. SPL, peak before clipping: 144 dB

Output impedance of MicroDot: 30 - 40 Ω. From DAD6001-BC: 100 Ω

Cable drive capability: Up to 300 m (984 ft) with DAD6001-BC XLR adapter

Output balance principle: Signal balanced with DAD6001-BC XLR adapter

Common mode rejection ratio (CMRR): > 60 dB from 50 Hz to 15 kHz with DAD6001-BC XLR adapter

Power supply (for full power): 5 V to max. 50 V via DPA adapter for wireless systems

Power consumption: Typ. 1.5 mA (microphone). 3.5 mA with DAD6001-BC XLR adapter

Connector: TA4F

Microphone diameter: 5.4 mm (0.21 in)

Cable length: 1.3 m

Cable diameter: 1.6 mm

Polarity + V on MicroDot pin for positive sound pressure (and pin 2 on DAD6001-BC XLR adapter)

Electromagnetic compatibility (EMC): Fully compatible

Temperature range: -40 ° C to 45 ° C (-40 ° F to 113 ° F)

Relative humidity (RH): up to 90%

Weight: 8.5g

These microphones combine the legendary sound of the 4088 directional capsule with the lightweight, flexible d:fine™ headworn system. The d:fine™ 4188 directional headworn microphone is ideal for spoken word and vocals. It follows the DPA tradition of providing accurate and natural speech intelligibility and handling very high sound pressures - users can both speak and sing into the microphone without any sign of distortion.


This microphone offers excellent off-axis rejection at high SPL. It effectively suppresses distant sound sources, making it perfect for demanding live performances with potentially problematic background noise and feedback. At high SPL or feedback, the 4088 directional capsule overcomes such challenges with ease. The bass response has been designed for optimum linearity 2-3 cm away from the sound source. This means that the bass roll-off will be relatively clear at a greater distance - a very important factor when attenuating background noise and combating feedback. The microphone capsule is also characterised by low distortion and moisture resistance.

DPA-Microphones

Ansprechpartner:

DPA Microphones A/S
Kokkedal Industripark 101
DK-2980 Kokkedal

E-Mail: info-de@dpamicrophones.com
Web: https://www.dpamicrophones.com/de/

    Sicherheits- und Warnhinweise:

    Dieses Produkt enthält elektronische Bauteile und/oder wird mit elektrischer Energie betrieben.

    Bitte verwenden Sie es ausschließlich gemäß der Bedienungsanleitung und mit geeignetem Zubehör.

   ⚠️ Schützen Sie das Gerät vor Feuchtigkeit, extremen Temperaturen und mechanischer Beschädigung.

    Prüfen Sie Kabel, Netzteile und Anschlüsse regelmäßig auf sichtbare Schäden.

 

    ℹ️ Weitere sicherheitsrelevante Hinweise entnehmen Sie bitte der beiliegenden Bedienungsanleitung.

    ℹ️ Bei Fragen zur sicheren Verwendung wenden Sie sich gerne an unseren Kundenservice.

0 of 0 reviews

Average rating of 0 out of 5 stars

Leave a review!

Share your experiences with other customers.