Article-No 1160562

Walrus Audio Canvas Mono

€155.00*

Prices incl. VAT plus shipping costs

Finanzieren Sie bequem mit Consors Finanz.
Weitere Informationen finden sie hier.

In stock

Walrus Audio Canvas Mono

Passive Mono DI Box / Line Isolator

in pedal format

converts an unbalanced signal into a balanced signal to go directly into the mixing console or audio interface

works perfectly with amp-in-a-box pedals, such as the Walrus Audio ACS1

DI mode: for sources with high impedance, such as electric guitar or bass

LI mode: for sources with low impedance (line level) such as amp sims, e.g. ACS1 or keyboards

linear frequency response: 20 - 20,000 Hz

specially wound "custom" transformers for the best sound quality and low distortion factor

Pad switch: -15 dB (only in DI mode)

GND lift to avoid ground loops

Sum switch mixes both input signals together on both Thru connections

Stompbox format - perfect for mounting on the pedalboard

passive design - no power supply required

made in the USA


Walrus Audio

Contact:

FACE bv
Hoek 76 - Unit 301
BE - 2850 Boom

E-Mail: info@face-be.eu
Web: https://www.face.be/

0 of 0 reviews

Leave a review!

Share your experiences with other customers.


Ähnliche Artikel

Neutrik NA2F-J-TX
Manufacturer:
Cost-effective solution for unbalanced/balanced line conversions and passive DI applications that do not require earthing or amplifier switching.
€28.55*
Temple Audio Design Studio MOD
Manufacturer:
Temple Audio designed the STUDIO MOD primarily as a re-amp device for receiving a balanced signal from your recording interface. This has evolved into much more! The active input buffer ensures the integrity of the signal and the DI provides a balanced XLR output for recording a high quality dry sound that is later used for re-recording.With STUDIO MOD, your customers can record their guitar dry and later decide on the perfect amp, pedal settings and microphone placement. This makes recording stress-free and non-binding.The STUDIO MOD is equipped with a first-class operational amplifier and offers a low-impedance and balanced output for clean and clear recordings.
€259.00*
Radial Engineering USB-Pro
Manufacturer:
Laptops and PCs are ubiquitoustools in AV technology. Until now, music or the sound embedded inpresentationshasmainlybeen tapped from the laptop or PC viathe 3.5 mm mini jack socket. The cables are connected directly to a mixing console or, at best, connected to the sound system with a transformertransformer or a DI box viaXLR cables.Frequentproblems with this configuration areinterference signalssuch as hum loops orthe interference known as "buzzing" from PC power supplies and hard drives (especially on laptops), as well as the familiar "crackling" and "cracking" at the mini jack socket or in the adapter cable. External sound cards from the studio sector are usually expensive, have more functions than they need and areöand are often difficult to install.
€298.00*
Palmer RIVER naab
Manufacturer:
If you connect a laptop to a sound system, the sound often leaves a lot to be desired. There is humming and rumbling, and sometimes there is also a loss of sound in the bass and treble. The Palmer naab, a two-channel media DI box, provides a reliable remedy.Using switches for ground lift and soft lift as well as the internal isolating transformers, hum loops can be prevented. The transformers also ensure optimum level and impedance matching. The result is clean, brilliant sound without noise.The Palmer naab is two-channel, but can be switched to mono if required, which is often very useful in practice so that a signal is not only heard on one side of the sound system. The mono sum signal is then available at both XLR outputs simultaneously; the naab can therefore also be used as a split box.There is a wide range of connections on the input side: 2 x 6.3 mm jack sockets, which can be balanced or unbalanced, as well as 2x RCA and 1x mini jack (stereo). This eliminates the need for error-prone adapter cables - which you always forget to take with you anyway! The outputs are designed as professional XLR sockets; their balanced wiring also allows longer cable runs without interference.Due to its passive operation, the Palmer naab does not require a power supply; this makes it extremely fail-safe, especially as the robust metal housing can take a beating. The Palmer naab is the ace up the sleeve for every lecture traveller, sound engineer and sound reinforcement specialist.
€179.00*
IMG Stageline FGA-102
Manufacturer:
€58.00*

Last seen products

Serato 12" Single Performance Series CV2.5 blue
Manufacturer: Serato
Serato Performance Series 12" Single Control Vinyl, A and B side with Control Tone to control Serato DJ and Serato Scratch Live software. The Performance vinyl series includes the latest Serato NoiseMap control signal in a remastered form. This signal is now 6dB louder than before, resulting in much more precise tracking and a more pleasant vinyl feel.
From €23.52*