Skip to main content Skip to search Skip to main navigation
Go to homepage
Schoeps KMIT

Directional capsule for the Colette series

identical acoustic properties to CMIT 5 and MiniCMIT: high directivity with low colouration of the sound arriving from the side

compatible with all amplifiers of the Colette series, e.g. CMC 1, CMC 6 (xt), CMD 42

with integrated steep low-cut at approx. 70 Hz

immune to moisture

incl. windscreen and clamp


Transmission range:

70 Hz - 22 kHz with CMC 1/CMC 6

70 Hz - 40 kHz with CMC 6xt/CMD 42


Sensitivity:

-35 dB (V/Pa), 17 mV/Pa


Low cut filter :

70 Hz, 21 dB/Oct with CMC 1

60 Hz, 22 dB/Oct with CMC 6/CMC 6xt/CMD 42


Equivalent noise level (A-weighted):

14 dB


Equivalent noise level (CCIR):

24 dB


Limit sound pressure level (THD < 0.5 %):

130 dB-SPL with CMC 6

133 dB-SPL with CMC 1

133 dB-SPL with CMD 42


Current consumption:

4.2 mA with CMC 6

3.1 mA with CMC 1


Length:

122 mm

Mono set with CMC 1 KV: 144 mm

Mono set with CMC 1 L: 148 mm

Mono set with CMC 1 U: 158 mm

Mono set with CMC 6/CMD 42: 234 mm

Schoeps

Ansprechpartner:

Schoeps GmbH
Spitalstraße 20
76227 Karlsruhe

E-Mail: info@schoeps.de
Web: https://schoeps.de/

    Sicherheits- und Warnhinweise:

    Dieses Produkt enthält elektronische Bauteile und/oder wird mit elektrischer Energie betrieben.

    Bitte verwenden Sie es ausschließlich gemäß der Bedienungsanleitung und mit geeignetem Zubehör.

    ⚠️ Schützen Sie das Gerät vor Feuchtigkeit, extremen Temperaturen und mechanischer Beschädigung.

    Prüfen Sie Kabel, Netzteile und Anschlüsse regelmäßig auf sichtbare Schäden.

 

    ℹ️ Weitere sicherheitsrelevante Hinweise entnehmen Sie bitte der beiliegenden Bedienungsanleitung.

    ℹ️ Bei Fragen zur sicheren Verwendung wenden Sie sich gerne an unseren Kundenservice.

0 of 0 reviews

Average rating of 0 out of 5 stars

Leave a review!

Share your experiences with other customers.


Cutsomers also bought

Schoeps CUT 60
Manufacturer:
The CUT 60 is inserted between the capsule and the microphone amplifier.It keeps infrasound interference away from the downstream devices. Pressure gradient receivers (directional microphones) in particular deliver very high infrasound signal levels in the event of wind interference or in elastic suspensions, which can saturate transformer inputs or amplifier stages, for example, before the audible interference component leads to overload. To avoid this, an active, steep-edged infrasonic filter cuts frequencies below 60 Hz with a slope of 24 dB/oct. This does not affect the character of speech transmissions.
€289.00*