DPA 5100

Acoustic principle: Pre-polarised condenser element (pressure, with interference tube and separating plates)

Polar pattern: Directional

Frequency response: 20 - 20,000 Hz (L, C, R, LS, RS); 20 - 120,000 Hz (LFE)

Frequency response (+/-2 dB): 200 - 16,000 Hz (L, C, R); 100 - 12,000 Hz (LS, RS); 20 - 120,000 Hz (LFE)

Sensitivity (nominal, +/-3 dB at 1 kHz): 26 mV / Pa (L, C, R); 28 mV / Pa (LS, RS)

Equivalent self-noise (A-weighted): L, C, R: typ. 18 dB(A) (max. 21 dB(A)); LS, RS: typ. 20 dB(A) (max. 23 dB(A))

Equivalent self-noise (ITU-R BS.468-4): L, C, R: typ. 29 dB (max. 32 dB); LS, RS: typ. 31 dB (max. 34 dB)

Signal-to-noise ratio (A-weighted), re. 1 kHz at 1 Pa (94 dB SPL): L,C, R: typ. 76 dB(A); LS, RS: typ. 74 dB(A)

Total harmonic distortion: less than 1 % up to 123 dB SPL peak

Dynamic range: 103 dB (L, C, R, LS, RS); 100 dB (LFE)

Max. Sound pressure level (peak before clipping): 132 dB

Output impedance: 50 Ohm

Cable drive capability: 100 m

Output equalisation principle: Active balanced signal

Common mode rejection ratio (CMRR): 60 dB, 50 - 20,000 Hz

Connection: LEMO Multipin

Mounting points: 3/8" thread

Dimensions (W x H x D): 240 x 140 x 195 mm

Capsule diameter: 5.4 mm

Cable diameter: 9.3 mm

Cable length: 5 m

Weight: 500 g

Operating temperature: -40° to +45° C (max. 90 % rel. humidity)

Operating voltage: +48 V phantom power (for full power)

Max. Output voltage: 1.8 Vrms / 2.5 Vpeak (L, C, R, LS, RS); 1 Vrms / 1.4 Vpeak (LFE)

Current consumption: typ. 5 mA (max. 5.5 mA)

Colour: Black