DPA 4266-OC-F-B03-LH

Flawless audio quality

Lightweight and flexible

Easy mounting, right or left

Minimal visibility

Moisture resistant

Flexible adapter system, suitable for most professional wireless systems

Technical specifications

Directional characteristic: Omnidirectional

Operating principle: Pressure

Capsule type: Pre-polarised condenser

Frequency response: 20 Hz - 20 kHz

Sensitivity, nominal, ±3 dB at 1 kHz: 6 mV/Pa; -44 dB referred to 1 V/Pa

Equivalent noise level, A-weighted: Typ. 26 dB(A) referred to 20 µPa (max. 28 dB(A))

Equivalent noise level, ITU-R BS.468-4: Typ. 38 dB (max. 40 dB)

Distortion, THD < 1 % - Legacy: 120 dB SPL RMS, 123 dB SPL peak

Distortion, THD < 1 % - CORE: 134 dB SPL RMS, 137 dB SPL peak

Dynamic range - Legacy: typ. 97 dB

Dynamic range - CORE: typ. 111 dB

Max. SPL, THD 10 %: 144 dB SPL peak

Nominal output impedance: 30 - 40 Ω

Cable routing capacity: Up to 300 m (984 ft) with DAD6001-BC XLR adapter

Output equalisation principle: Signal equalisation with DAD6001-BC XLR adapter

Common mode rejection ratio (CMRR): > 60 dB from 50 Hz to 15 kHz with DAD6001-BC XLR adapter

Power supply (for full power): For wireless systems: min. 5 V - max. 10 V via DPA adapter

With DAD6001-BC: P48 (phantom power). Works from 12 V

Power consumption: typ. 1.5 mA (microphone). 3.5 mA with DAD6001-BC XLR adapter

Plug: 3-pin LEMO

Colour: Beige

Polarity: A positive voltage is generated on the MicroDot pin as the sound pressure increases.

Temperature range: -40 °C to 45 °C (-40 °F to 113 °F)

Relative humidity (RH): Up to 90 %

Weight: 0.01 kg