Skip to main content Skip to search Skip to main navigation
Go to homepage
DPA 4018V-B-B01

Directional pattern: Supercardioid

Operating principle: Pressure gradient

Capsule type: Pre-polarised condenser

Frequency range: 20Hz - 20kHz, permanent third-order high-pass filter at 80Hz

+/-2dB at 12cm: 100Hz - 16kHz with 3dB soft boost at 12kHz

Sensitivity: 5mV/Pa; -46dB re. 1V/Pa (nominal, +/-2dB at 1kHz)

Equivalent noise level: Typ. 19dB(A) to 20µPa (max. 21dB(A)) (A-weighted)

S/N ratio: Typ. 75dB(A) (A-weighted, re. 1kHz at 1Pa, 94dB SPL)

Dynamic range: Typ. 120dB

Maximum sound pressure level: 160 dB peak before clipping

Output impedance: 100 Ohm

Minimum load impedance: 1k Ohm

Cable drive capacity: 100m / 328ft

Output equalisation principle: Impedance equalisation with active drive

Common mode rejection ratio: >50dB at 1kHz

Power supply: 48V (+/-4V) phantom power (for full power)

Current consumption: Max. 2mA

Maximum output voltage: 8V (RMS)

Polarity: +V on pin 2 for positive sound pressure

Connector: 3-pin XLR connector (pin 1: shield, pin 2: signal + phase, pin 3: - phase)

Colour: Matte black

Capsule diameter: 19mm / 0.75''

Microphone length: 205mm / 8.1''

Temperature range: -40°C to 45°C / -40°F to 113°F

Relative humidity: Up to 90 per cent

Properties

Characteristic: Supercardioid
Switches: No
Tube: No
Type of construction: Capacitor
USB connection: No
DPA Microphones

Contact:

DPA Microphones A/S
Kokkedal Industripark 101
DK-2980 Kokkedal

E-mail: info-de@dpamicrophones.com
Web: https://www.dpamicrophones.com/de/

0 of 0 reviews

Average rating of 0 out of 5 stars

Leave a review!

Share your experiences with other customers.