DPA 4011A
€1,749.00
Prices incl. VAT plus shipping costs
(Free shipping from 49,-€ order value within Germany)
Weitere Informationen finden sie hier.
Delivery on request
Directional pattern: Kidney
Operating principle: Pressure gradient
Capsule type: Pre-polarised condenser
Frequency response: 20 Hz - 20 kHz
Frequency range +/- 2 dB at 30 cm (11.8 in): 40 Hz - 20 kHz
Nominal sensitivity +/- 2 dB at 1 kHz: 10 mV / Pa; -40 dB re. 1 V / Pa
Equivalent noise level, A-weighted: Typ. 18 dB (A) re. 20 uPa (max. 20 dB (A))
Equivalent noise level, ITU-R BS.468-4: Typ. 25 dB (correct with the attenuator set to 0 dB or -20 dB)
Distortion, THD <1%: 136 dB SPL RMS, 139 dB SPL peak
Dynamic range: Typ. 121 dB
Max. Sound pressure, THD 10%: 159 dB sound pressure peak
Switchable attenuator, filter etc.: 0 dB / -20 dB
Nominal output impedance: 200
Minimum load impedance: 2 k
Cable drive capacity: 100 m (328 ft)
Output balance principle: Impedance equalisation with Active Drive
Common mode rejection ratio (CMRR): > 60 dB
Power supply (for full power): P48 (phantom power)
Current consumption: 2.8 mA
Connection: XLR-3M. Pin 1: Shield, Pin 2: Signal + phase, Pin 3: - phase
Colour: Matt black
Weight: 158 g (5.6 oz)
Microphone diameter: 19 mm
Capsule diameter: 19 mm
Microphone length: 170 mm (6.7 in)
Maximum output voltage, RMS: > 5 V.
Polarity: + V on pin 2 for positive sound pressure
Temperature range: -40 ° C to 45 ° C (-40 ° F to 113 ° F)
Relative humidity (RH): Up to 90%
Matching tolerance (frequency response and sensitivity): ± 1 dB
Phase deviation for kit: <10°
Properties
| Characteristic: | Cardioid |
|---|---|
| Directional microphone: | No |
| Incl. Clamp: | Yes |
| Low cut: | No |
| Pad: | No |
| Stereo pair: | No |
| Type of construction: | Capacitor |
Contact:
DPA Microphones A/S
Kokkedal Industripark 101
DK-2980 Kokkedal
E-mail: info-de@dpamicrophones.com
Web: https://www.dpamicrophones.com/de/
Login