DPA 4011-DF-F-B01-120

Directional pattern: Kidney

Operating principle: Pressure gradient

Capsule type: Pre-polarised condenser

Frequency response: 20 Hz - 20 kHz

Frequency range +/-2 dB at 30 cm (11.8 in): 40 Hz - 20 kHz

Nominal sensitivity +/-2 dB at 1 kHz: 10 mV / Pa; -40 dB re. 1 V / Pa

Equivalent noise level, A-weighted: Typ. 18 dB (A) re. 20 uPa (max. 20 dB (A))

Equivalent noise level, ITU-R BS.468-4: Typ. 25 dB

Distortion, THD <1%: 136 dB SPL RMS, 139 dB SPL peak

Dynamic range: Typ. 121 dB

Max. Sound pressure, THD 10%: 144 dB sound pressure peak

Nominal output impedance: 100 Ω

Minimum load impedance: 2 kΩ

Cable drive capacity: 100 m (328 ft)

Output balance principle: Impedance equalisation

Common mode rejection ratio (CMRR):> 40 dB

Power supply (for full power): P48 (phantom power)

Current consumption: 3.5 mA

Connection: XLR-3M. Pin 1: Shield, Pin 2: Signal + phase, Pin 3: - phase

Colour: Matt black

Microphone diameter: 19 mm

Capsule diameter: 19 mm

Microphone length: capsule: 23 mm (0.9 inch), boom poles: 20 cm (8 inch), 32 cm (13 inch), 47 cm (18 inch), 77 cm (30 inch), 122 cm (48 inch)

Maximum output voltage, RMS: 2.2 V.

Polarity: + V on pin 2 for positive sound pressure

Temperature range: -40° C to 45° C (-40° F to 113° F)

Relative humidity (RH): Up to 90%

Matching tolerance (frequency response and sensitivity): ± 1 dB

Phase deviation for kit: <10°