The CPH DMX 1 PWR 1 combination cable contains a mains cable and a DMX cable in a hybrid solution.According to DMX logic, the male plug is located on the receiver and the female plug on the transmitter (opposite to the approach used for XLR in the audio sector).Optimum power supply when using the hybrid on stage or in the studio is ensured by a 3x 1.5 mm2 mains cable and a balanced AES/EBU cable.The split of the cable is 30 cm.
CONNECT 6 is a dual USB-C audio interface with DSP power and unrivalled flexibility for home recording and content creation. It offers extensive analogue and digital connection options, full iOS/Android device integration and crystal-clear, studio-quality preamps. The integrated DSP effects refine your sound latency-free. Auto Setup helps you get started with the optimum settings for voice, vocal and instrument recordings. The CONTROL CENTER offers virtual channels, a mixer, loopback and customised routing. With just a few clicks, you can set up your own workflows from simple to complex. As your audio signals are processed via the hardware-based DSP, the setup is extremely stable and independent of your computer's performance. Everything is conveniently managed via a single device - no more workarounds.
The must-have tool for ribbon and dynamic microphones!The Cloudlifter CL-1 is a simple and easy-to-use tool for solving common problems in recording studios or live applications. The Cloudlifter was developed for use with all passive microphones, including ribbon microphones. The Cloudlifter CL-1 works safely with any phantom-powered microphone and provides an extremely clean and amplified level of up to 25 dB.With the help of the Cloudlifter CL-1, the performance of passive microphones can be significantly increased even when long cable runs are required. Thanks to the clean and amplified audio signal provided by the Cloud Cloudlifter, they are equally suitable for broadcast, live and studio applications. The patented Cloudlifter technology is enclosed in a robust steel housing and provides excellent shielding against external interference factors. With the supplied strap, the Cloudlifter CL-1 can be easily attached to suitable locations in any conceivable environment (e.g. live on stage).The Cloudlifter CL-1 works on the basis of patented technologies that leave the signal path completely free of transformers, capacitors or transformers. The CL-1 contains a discrete JFET circuit that provides exemplary amplification without sacrificing the natural sound characteristics of the microphone.Cloud Cloudlifters are used to optimise the signal-to-noise ratio and improve the performance of passive microphone/preamplifier combinations. The high flexibility and reliability allows many other applications, such as:When recording directly into the DAW:Using inadequate microphone preamps and low-power microphone amplifiersWhen using dynamic microphones with low output powerWhen miking weak sound sources, e.g. acoustic instruments or voices and vocalsTo reduce noise and amplify signals when long cable runs are required
Stagg US-Red Soprano Ukulele red with bagTop: basswoodBack and sides: basswoodBody length: 240 mm (9.3")Neck: NatoHeadstock: NatoNeck and headstock length: 300 mm (12")Fingerboard: Walnut composite, 177 mm (7"), 12 fretsScale length: 349 mm (13.7")Bridge: Walnut compositeOverall length: 540 mm (21.3")Tuners: Classic with plastic buttonsIncluded: Nylon gig bagTuning: G-C-E-AColour: Red