ART DUALZDIRECT
€59.00
Prices incl. VAT plus shipping costs
(Free shipping from 49,-€ order value within Germany)
Delivery on request
Fully passive, high-quality isolating transformer, without battery
Transfers 50k Ohm input signals to 600 Ohm balanced outputs
Switchable input attenuation (0, -20, -40 dB)
Phase reversal switch
Ground lift switch (inputs are completely isolated from ground and outputs)
Balanced XLR outputs
Compact, black anodised aluminium housing
Frequency response: 10 Hz - 50 kHz, +/- 0.5 dB @ +4 dBu
THD: 0.01% typical @ 1 kHz, +18 dBu / <.05% @ 100 Hz, +18 dBu
Crosstalk attenuation: > 80 dB (typical)
Inputs: 1/4" TRS unbalanced (2), 50 k Ohm
Parallel loop-through sockets: 1/4" TRS (2)
Outputs: XLR male (2), 600 Ohm
Low-pass filter: switchable, -3 dB @ 30 kHz
Dimensions (WDH mm): 99 x 117 x 47
Weight: 0.40kg
The DUALZDirect provides two independent, fully passive, high quality interfaces that allow you to connect instrument, line or speaker level signals to a mixer or other balanced inputs via high performance audio isolation transformers. Each of the high-impedance single-ended 1/4" inputs is converted by a transformer into an isolated, balanced, low-impedance signal output.
The DUALZDirect's audio transformers have an extremely flat and wide frequency response and can handle high signal levels. This gives the DUALZDirect a very clean and neutral sound with a variety of signal sources and over long signal runs in high noise environments.
The ATTENUATOR input switches allow a wide range of signal levels and the THRU input sockets allow you to monitor your signal chain. The GROUND LIFT switches allow you to completely isolate the input and output signal grounds, if necessary, to isolate two systems and reduce hum and ground loop noise.
What further sets the DUALZDirect apart from other "DI" boxes are its advanced features and versatility. We have added switchable low pass filters that eliminate all very high frequency noise. These Bessel filters on the outputs are located outside the audio range and are primarily designed to reduce high frequency interference before it enters the main system.
The filters are very effective in reducing noise artefacts from digital computers when using DUALZDirect as an interface between a computerised audio workstation and your monitors.
Although the PHASE INVERT switches are not normally included in your DI box "Run of the Mill", they have been added to allow you to switch the signal polarity directly at the source. This feature is especially handy when combining a direct tip with a mic feed in the mix.
The compact, black anodised aluminium housing and its passive design allow the DUALZDirect to provide years of trouble-free service in live sound, permanent/fixed installation, D.J. and virtually any PA application. The DUALZDirect's full feature set, rugged construction and high-end specifications make it the obvious choice.
Ansprechpartner:
Teac Europe GmbH
Bahnstraße 12
65205 Wiesbaden
E-Mail: info@teac.eu
Web: https://teac.eu/de/die-zukunft-der-aufzeichnung
Sicherheits- und Warnhinweise:
Dieses Produkt enthält elektronische Bauteile und/oder wird mit elektrischer Energie betrieben.
Bitte verwenden Sie es ausschließlich gemäß der Bedienungsanleitung und mit geeignetem Zubehör.
⚠️ Schützen Sie das Gerät vor Feuchtigkeit, extremen Temperaturen und mechanischer Beschädigung.
⚡ Prüfen Sie Kabel, Netzteile und Anschlüsse regelmäßig auf sichtbare Schäden.
ℹ️ Weitere sicherheitsrelevante Hinweise entnehmen Sie bitte der beiliegenden Bedienungsanleitung.
ℹ️ Bei Fragen zur sicheren Verwendung wenden Sie sich gerne an unseren Kundenservice.
Login