Stands

Classic shelf for sheet music, exercise books and books, for attaching to music stands and other stands, with a tube diameter of up to 30 mm. The 350 gram light tray made of aluminium sheet has a surface area of 90 x 240 mm and foldable struts with a height of approx. 130 mm. The shelf also scores points with its hard-wearing powder coating and surface-friendly clamping.

The elegant T-Model luminaire with 4 LEDs provides a pleasant warm white light with a colour temperature of 3000 Kelvin. The brightness can be switched to 2 levels. The energy-efficient LEDs have an extremely long service life of up to 100,000 hours. The light cone is variably adjustable thanks to the flexible gooseneck. With clip (up to 25 mm) for attaching to music stands, table tops etc., can also be used as a floor lamp. An integrated magnet also allows it to be attached to metal plates. Very compact and handy. The scope of delivery includes 3 batteries (1.5 V AAA) with a light duration of up to 10 hours. Operation via an external mains adapter is also possible.

Sturdy metal holder for holding bottles, glasses and cups with a maximum diameter of 85 mm. The height of the body is 80 mm and the weight is approx. 270 grams. The surface-friendly clamp is suitable for stands with a tube diameter of up to 30 mm.

In the past, anyone who wanted to produce music, videos or other content professionally had to go to specialised studios. Today, podcasts and YouTube videos for millions of followers and even international hit albums can be recorded at home or spontaneously on the go. It doesn't take much anymore. However, it is crucial that the remaining equipment is as flexible and well thought-out as possible.With the VARI®-ARM M 38, Gravity® has created such a universal tool that allows you to use a wide variety of devices - from a microphone clip to a tablet or an action cam - almost anywhere and in any orientation in a matter of seconds.The VARI®-ARM M 38 is an innovative mounting arm with three joints that allow you to move your equipment freely and precisely into any desired position. The highlight: you only need one adjusting screw to lock and unlock the three joints. As soon as you have found your desired position, tighten the adjusting screw and all elements of the VARI®-ARM M 38 remain firmly and securely in position - thanks to a load capacity of 3 kilograms, even with DSLM cameras including a standard lens or a heavyweight microphone such as the broadcast classic RE-20.At the top end of the VARI®-ARM is a 3/8" thread onto which you can screw a microphone clamp, a pop filter and more. You are completely flexible with the included adapter (3/8" to 1/4" reduction thread) with which you can use almost any photo camera on the market, a handheld recorder or a smartphone holder with the VARI®- ARM M 38. Thanks to the solid clamp with a wide 15 to 35 mm clamping range at the lower end, the VARI®- ARM can also be easily attached to most tables and tubes (e.g. tripods). The clamp can also be unscrewed to reveal a 3/8" thread for screwing on the VARI®-ARM itself.As a universal tool for your creative applications, there are virtually no limits to the uses of the VARI®-ARM M 38.

With the help of this adapter, you can compensate for uneven floors, stairs, steps or slopes in no time at all. The levelling adapter is mounted once on one of the tripod feet of the Wind-Up tripod "3000" and fixed in place using a clamp. The required levelling length is infinitely adjustable and enables a height compensation of max. 200 mm. If no levelling is required, the adapter simply remains in the basic position on the tripod base.

Attractive stand for lights and smaller loudspeaker boxes. Thanks to the heavy, flat steel plate, the stand is ideally suited forfor use where space is at a premium. Depending on requirements, there are three ways to position the stand. In addition tothe centric and off-centre position, the tube combination can also be mounted in the corner. Apractical carrying handle, a cable feed-through and four stable feet are further useful features. The height is fixed withthe height is fixed with a safety hook and secured with a low-noise, backlash-free clamping screw. The slim design of the clampenables space-saving transport and ensures a discreet appearance. The usable height is between 1,400and 2,400 mm and is achieved in 5 steps of 200 mm. The integrated M10 threaded bush enables the attachment of a crossbaror the direct attachment of lights. The maximum load capacity with centric loading in the centre position is 20 kg.